lega 400 uns n04400 en 2.4360 monel 400 vite

Casa » Prodotti » Chiusura in lega di nichel » lega 400 uns n04400 en 2.4360 monel 400 vite

Vite Monel 400 No.61 in lega 400 UNS N04400 EN 2.4360

specificazioni

Alloy 400 UNS N04400 EN 2.4360 Monel 400 screw

1. Prompt & Professional Response.

2. Prezzo competitivo e credibile.

3. Alta qualità e consegna veloce.

4. Servizio personalizzato - (Prodotto su disegno o campione del cliente).

Record di ordini parziali di prodotti correlati per riferimento

Monel 400 fastener screw Exported to United Arab Emirates.

NO.	DESCRIPTION	QTY	Standard
1	Monel 400 hex cap screw 3/4”-UNCx120mm	300PCS	ASME B18.2.1

Monel 400 hexagon head bolts c/w nuts Exported to Kerea

NO.	DESCRIPTION	QTY
1	Monel 400 hexagon head bolts c/w nuts DIN933/934, M12x45	1500set

Breve introduzione del materiale

Alloy 400 UNS N04400 EN 2.4360 Monel 400

A. Alloy 400 UNS N04400 EN 2.4360 Monel 400 Overview

Monel 400 is a nickel-copper alloy (about 67% Ni –23% Cu) that is resistant to sea water and steam at high

temperatures as well as to salt and caustic solutions. Characteristics:

1) Resistant to seawater and steam at high temperatures

2) Excellent resistance to rapidly flowing brackish water or seawater

3) Excellent resistance to stress corrosion cracking in most freshwaters

4) Particularly resistant to hydrochloric and hydrofluoric acids when they are de-aerated

5) Offers some resistance to hydrochloric and sulfuric acids at modest temperatures and concentrations, but

is seldom the material of choice for these acids

6) Excellent resistance to neutral and alkaline salt

7) Resistance to chloride induced stress corrosion cracking

8) Good mechanical properties from sub-zero temperatures up to 1020° F

9) High resistance to alkalis

applicazioni:

1) Marine engineering

2) Chemical and hydrocarbon processing equipment

3) Gasoline and freshwater tanks

4) Crude petroleum stills

5) De-aerating heaters

6) Boiler feed water heaters and other heat exchangers

7) Valves, pumps, shafts, fittings, and fasteners

8) Industrial heat exchangers

9) Chlorinated solvents

10) Crude oil distillation towers

B. Composizione chimica,%

C	Mn	S	Si	Ni	Cu	Fe
.30 max	2.00 max	.024 max	.50 max	63.0 min	28.0-34.0	2.50 max

C. Proprietà meccaniche

Proprietà tipiche di resistenza alla temperatura ambiente del materiale ricotto

Forma del prodotto	Condizione	Trazione (ksi)	.2% Resa (ksi)	Allungamento (%)	Durezza (HRB)
Rod & Bar	ricotto	75-90	25-50	60-35	60-80
Rod & Bar	Trafilato a freddo Stress Relieved	84-120	55-100	40-22	85-20 HRC
Piatto	ricotto	70-85	28-50	50-35	60-76
Foglio	ricotto	70-85	30-45	45-35	65-80
Tube & Pipe Seamless	ricotto	70-85	25-45	50-35	75 max *